Code: WEB22578
Save $20 off an order of $225 or more. Expires July 28, 2008.
Saturday, July 26, 2008
Sunday, July 20, 2008
Gas Blow-back M4 Carbine from WA (AirSoft)
Western Arms is making a gas blow-back airsoft version of the M4. Western Arms has been making high-end gas powered airsoft guns for over a decade. Until the M4, I don't think they've ever really don't a rifle before, unless you count the funky hi-cap 1911s with stocks and long barrels.
Pictures and Info on M4 at WarGame Club Shop
Pictures and Info on M4 CQBR at WarGame Club Shop
Review of WA M4 CQBR at RedWolf Airsoft
Although it's rather expensive compared to an electric airsoft assault rifle, they are a lot more fun to shoot. The gas blow-back guns actually have a little recoil, where the electric guns just kinda vibrate and make sewing machine noises.
A lot cheaper than a real M-16 or converted AR (about $10,000), and with some precautions, you can shoot airsoft guns indoors.
I'm sure it will only be a matter of time before there are longer barrels available. Edit: Nevermind, I was going backwards through the Arnie's Airsoft News, and didn't know there was a standard M4 available when I first posted.
Pictures and Info on M4 at WarGame Club Shop
Pictures and Info on M4 CQBR at WarGame Club Shop
Review of WA M4 CQBR at RedWolf Airsoft
Although it's rather expensive compared to an electric airsoft assault rifle, they are a lot more fun to shoot. The gas blow-back guns actually have a little recoil, where the electric guns just kinda vibrate and make sewing machine noises.
A lot cheaper than a real M-16 or converted AR (about $10,000), and with some precautions, you can shoot airsoft guns indoors.
I'm sure it will only be a matter of time before there are longer barrels available. Edit: Nevermind, I was going backwards through the Arnie's Airsoft News, and didn't know there was a standard M4 available when I first posted.
Alliant Blue Dot Powder
I use a lot of fast-burning powder for my normal practice and competition ammo, but I couldn’t use the usual Hogdon TiteGroup for a Gold Dot replica load, because the pressure would be too high.
Blue Dot is a relatively coarse powder, whose granules resemble little disks about two millimeters in diameter. It seems to meter fairly well in my Hornady Lock-N-Load measure, with accuracy and consistency similar to Titegroup.
Although felt recoil and muzzle flip is quite mild, even with the fairly hot loads I use it for, the “boom” and fireball at the muzzle are very noticeable.
I consider Blue Dot to be a very clean powder. I have not seen unburned powder anywhere, and the powder residue is not very hard to remove. This seems sort of unusual, because I’m completely filling the case with powder. You’d think that there would be more junk left behind.
I am happy with this powder, and will probably continue to use it to make replicas of self defense pistol loads. It can’t be used to load 9mm to major, but outside of USPSA Open class, almost no one loads to that power level anyway. Hogdon HS-6, which I bought for 9mm major loads, leaves unburned powder behind. To get as much power as you get from HS-6 without the mess, you’d have to step up to the more expensive VV powders, or deal with even more noise.
Blue Dot is a relatively coarse powder, whose granules resemble little disks about two millimeters in diameter. It seems to meter fairly well in my Hornady Lock-N-Load measure, with accuracy and consistency similar to Titegroup.
Although felt recoil and muzzle flip is quite mild, even with the fairly hot loads I use it for, the “boom” and fireball at the muzzle are very noticeable.
I consider Blue Dot to be a very clean powder. I have not seen unburned powder anywhere, and the powder residue is not very hard to remove. This seems sort of unusual, because I’m completely filling the case with powder. You’d think that there would be more junk left behind.
I am happy with this powder, and will probably continue to use it to make replicas of self defense pistol loads. It can’t be used to load 9mm to major, but outside of USPSA Open class, almost no one loads to that power level anyway. Hogdon HS-6, which I bought for 9mm major loads, leaves unburned powder behind. To get as much power as you get from HS-6 without the mess, you’d have to step up to the more expensive VV powders, or deal with even more noise.
Book Review: Combat Handgunnery, ed. 5 & 6
There are two editions that Ayoob wrote; the older version that I have (5th Edition), and the newer 6th edition, which is mostly the same, but with some updates. If you want to get serious about handgunning and/or keeping/carrying a pistol for defense, then you should really consider getting a copy, preferably the newer 6th edition. This is kind of the Bible of handgunning. If you've been around a while though, it may be a little bit of a waste of time and money.
Although not all gun nuts are convinced that Ayoob is the most qualified person to write a book like this, I think the information is logical and backed up by real-world evidence. Ayoob has been writing professionally for decades, most of which revolves around self-defense and handguns, and the writing in the book reflects that experience.
The book covers handgun selection (including revolvers, single-action autos, double-action autos, lightweight revolvers, micro handguns, and striker-fired autos (including Glocks), buying used handguns, selecting a defense load, selecting holsters, carry etiquette, shooting technique (including reloads, drawing from concealment, using cover, safety manipulation, "point shooting," and other tactics), "responsible customizing," tips on keeping you out of jail if you have to use a firearm for defense, securing handguns with safes and locks, women and young people and handguns, and it touches on competition.
Different ready positions, point shooting techniques, handgun grasping techniques, and stances are evaluated. Some common mistakes are explained.
The Maxing Qualification chapter may be very useful to those in law enforcement, and those that need to take a qualification course to get a concealed carry permit.
Personally, I found "Lost Secret #5," the smooth trigger roll, to be extremely useful in slow accurate shooting. Otherwise, the book is going to be pretty useless to those only interested in shooting paper bulleyes.
There are competition books ("Practial Shooting: Beyond Fundamentals," by Brian Enos, and Matt Burkett's "Practical Shooting Manual") and DVDs (the Matt Burkett Practial Shooting series) that go into way more detail on the nuts and bolts of shooting a pistol, but this is a real good place to start, and is a bargain at the price.
Although not all gun nuts are convinced that Ayoob is the most qualified person to write a book like this, I think the information is logical and backed up by real-world evidence. Ayoob has been writing professionally for decades, most of which revolves around self-defense and handguns, and the writing in the book reflects that experience.
The book covers handgun selection (including revolvers, single-action autos, double-action autos, lightweight revolvers, micro handguns, and striker-fired autos (including Glocks), buying used handguns, selecting a defense load, selecting holsters, carry etiquette, shooting technique (including reloads, drawing from concealment, using cover, safety manipulation, "point shooting," and other tactics), "responsible customizing," tips on keeping you out of jail if you have to use a firearm for defense, securing handguns with safes and locks, women and young people and handguns, and it touches on competition.
Different ready positions, point shooting techniques, handgun grasping techniques, and stances are evaluated. Some common mistakes are explained.
The Maxing Qualification chapter may be very useful to those in law enforcement, and those that need to take a qualification course to get a concealed carry permit.
Personally, I found "Lost Secret #5," the smooth trigger roll, to be extremely useful in slow accurate shooting. Otherwise, the book is going to be pretty useless to those only interested in shooting paper bulleyes.
There are competition books ("Practial Shooting: Beyond Fundamentals," by Brian Enos, and Matt Burkett's "Practical Shooting Manual") and DVDs (the Matt Burkett Practial Shooting series) that go into way more detail on the nuts and bolts of shooting a pistol, but this is a real good place to start, and is a bargain at the price.
Book Review: The Glock In Competition
Contains a good bit of information on modifying a Glock pistol for competition, although you can find some of this information online for free. Springs, sights, tightening slide-to-frame fit, extending the ejector for frame mounted scopes, grip modifications, lowering the ejection port, weak points in the Glock design, and, of course, trigger jobs are covered.
The chart of what pistols are useful in which organization and class is pretty helpful. There are short reviews on the models 24 and 35. Towards the end of the book, information is given on GSSF, IDPA, and USPSA/IPSC. I found this to be a pleasant surprise, as I really don't know much about USPSA or GSSF, because there's not many of those clubs around here.
Reloading/handloading for Glocks is covered, with tips specific to different types of competition. The infamous Glock KaBooms are explained. If you don't reload, there's tips on buying factory ammunition.
The very end of the book is biographys of past and present Glock competition shooters, including The Great One of Glock, Dave Sevigny.
The chart of what pistols are useful in which organization and class is pretty helpful. There are short reviews on the models 24 and 35. Towards the end of the book, information is given on GSSF, IDPA, and USPSA/IPSC. I found this to be a pleasant surprise, as I really don't know much about USPSA or GSSF, because there's not many of those clubs around here.
Reloading/handloading for Glocks is covered, with tips specific to different types of competition. The infamous Glock KaBooms are explained. If you don't reload, there's tips on buying factory ammunition.
The very end of the book is biographys of past and present Glock competition shooters, including The Great One of Glock, Dave Sevigny.
Friday, July 18, 2008
1911 Build Hits Snag
On Tuesday, I went into the local gun shop, and had the owner put in an order for a Caspian Government model frame from Midway. He said it would be a while before he knew what the shipping would run, but I didn't think much of it, and put down a $100 deposit.
Got a call from him today. Midway wants to charge over $60 to ship just a frame! Now, they do have to use overnight shipping to send a handgun across a state border, but last I checked, the cost was something like $28 plus tax.
So he's checking with Caspian, to see what they can do.
There are several things that could happen:
1. I could get lucky, and Caspian has a carbon steel Basic frame in stock, and I might actually save some money.
2. I eat the $60+ shipping charge from Midway, since the deposit is non-refundable, and continue as planned. So that's $175 for the frame, $60 for shipping, plus the transfer fee, and sales tax just for a stripped 1911 frame in the white.
3. I wait several weeks to get a frame from Caspian.
4. I order a Springfield G.I. 1911A1, strip everything off the frame, and end up with my Ultimate 1911, and have a box full of parts left over. Maybe I sell off some of the parts for less than they're worth.
Friday, July 4, 2008
Competition Shooting Book and DVD Reviews
Practical Shooting: Beyond Fundamentals
The subject matter is similar to that of Thinking Practical Shooting. The way Enos writes in the first couple chapters, it’s a bit like Asian philosophy or something. There’s a lot of talk about focus, concentration, awareness, consciousness, meditation and all the subtle differences. I found it to be really obnoxious. It’s almost as bad as listening to a hippie explain what it’s like to be high. Fortunately, the rest of the book is a little easier to digest.
There are some good tips on how to refine your draw and presentation. There are some drills that should be helpful. It may be one of the best books on shooting technique, and has some interesting insights on which targets to engage in which order in a competition setting.
I appreciate what Enos has done for the sport, and I suppose the Thinking Practical Shooting, and Principles of Performance books that I prefer would not have existed without Beyond Fundamentals. After the second read, I have decided to recommend this book, if you think your shooting mechanics may need some improvement.
There is a lot of information in the book. Although the book is not very thick, it seemed like it took me weeks to get through it, whereas I got through the other books pretty quickly. I think that there may be more material per dollar than the others.
Burkett's Videos 1-3
I waited far too long to buy these. Seriously. I might have gotten more of my match entry fees back as prize money.
Setting up equipment. Although some of the holster information is found in the Bianchi book, Blued Steel and Gunleather (a book that's older than I am), I have not seen this much information elsewhere. He even suggests a couple models of football cleats for the USPSA/IPSC games.
There is some discussion of pistols for the games, although almost every pistol shown in the videos is of the 2011 type sold by Burkett’s sponsor SVI.
Although most of videos are devoted to USPSA/IPSC type matches, much of the information carries over to IDPA, and there is IDPA specific information.
Burkett dissects draws, movement between shooting boxes, stepping into the shooting boxes, shooting from barricades, shooting on the move (also covered in Practical Shooting: Beyond Fundamentals, although slightly different technique), kneeling from standing-start and from moving, going prone, and target-to-target transitions to name a bunch. Applied to your game, these tips should cut fractions of a second off your time here and there, and improve your scores fairly dramatically.
One thing that kinda bugged me was that he made a crack about one of his students hopping into the shooting box, rather than stepping in. I swear that I’ve seen Leatham or Miculek teach exactly that on the Shooting USA TV series.
Video 3 is an interview with Brian Enos. It is about 45 minutes long, and is not broken up into chapters, which means you have to watch it all in one lump, or note the time where you left off and fast forward to it the next time.
Burkett's Video 4
The video starts out with a review of setting up gear, grip, stance, and draw, as shown in the first three videos.
Shooting from trigger reset is discussed. I wondered where that would come in.
There is more coverage of shooting multiple targets with drills on a couple plate racks.
Bonus video is of a national USPSA match. Damn! Those open class guys can really hose those targets! The stages are pretty wild too.
Burkett Practical Shooting Manual
This one’s a tough call. A lot of the same material is in the first three volumes of his video series, and it makes a little more sense in video form than in words. There are some practice drills recommended in the book that may be helpful, and some other tips and equipment information that isn’t covered in the video series. If money is really tight, and you’re good at reading textbooks, maybe skip the videos and buy the book. Otherwise, I would say skip the book and just buy the videos. If you feel like you get a lot out of the videos and want to get a little bit more of the same, then consider getting the book also.
Thinking Practical Shooting
Mostly, this book is on being mentally prepared to shoot a match, and win it. I'm having a hard time explaining what's in it without giving it all away.
Although the author says that he didn't want to make it a book about shooting technique, there is some technique discussed, and it was good enough that I highlighted a good bit of it.
I am glad I bought this book, because I can see how this information can definitely help cut down on the number of "brain freezes," mistakes, and garden variety match screw-ups. I started highlighting on my second time through the book, and by far it is my most highlighted shooting book. There is a lot of useful information here.
The book will help you to be prepared to shoot, thinking positive about your skills, and hitting
the spots you want to shoot as you go through the stage. I can see it also helping you to get jobs, women, and success in general. . . although I imagine a lot of you just rolled your eyes at that.
The book is specifically centered on IPSC, although almost all of it applies to USPSA, and a lot of it still applies to IDPA and other "practical shooting" matches.
If you are not shooting matches yet, get out there and do it, but definitely think about getting a copy of this book.
Refinement and Repetition
It’s an introduction, followed by 80 pages of dry-fire drills, with half of those pages dedicated to recording your times. I probably could have lived without this book; I could have come up with my own dry-fire drills and recorded them in a notebook or in a spreadsheet.
Principles of Performance
The first eighty-some pages are similar to Thinking Practical Shooting. Then there’s thirty-something pages of dry-fire drills (although half of the pages are for recording your times). Last are about twenty pages of live-fire exercises, again with space for recording your times.
The first eighty pages are what makes the book valuable to me. There may be some duplication from Saul’s book, but there’s a lot of other things that Saul didn’t hit on. There is an interview with Lanny Bassham, author of With Winning in Mind, that I think comes off like a sales pitch, but contains some helpful information, and I’ll probably end up picking up a copy of the book.
Perfect Practice
Like Refinement and Repetition, this is a dry-fire drill book. There’s about 120 pages of drills with maybe 1/8 of that dedicated to space for you to record your times. I could have lived without this one also. I guess that I was looking for some novel approaches to dry-fire practice, and I guess there just isn’t any.
The subject matter is similar to that of Thinking Practical Shooting. The way Enos writes in the first couple chapters, it’s a bit like Asian philosophy or something. There’s a lot of talk about focus, concentration, awareness, consciousness, meditation and all the subtle differences. I found it to be really obnoxious. It’s almost as bad as listening to a hippie explain what it’s like to be high. Fortunately, the rest of the book is a little easier to digest.
There are some good tips on how to refine your draw and presentation. There are some drills that should be helpful. It may be one of the best books on shooting technique, and has some interesting insights on which targets to engage in which order in a competition setting.
I appreciate what Enos has done for the sport, and I suppose the Thinking Practical Shooting, and Principles of Performance books that I prefer would not have existed without Beyond Fundamentals. After the second read, I have decided to recommend this book, if you think your shooting mechanics may need some improvement.
There is a lot of information in the book. Although the book is not very thick, it seemed like it took me weeks to get through it, whereas I got through the other books pretty quickly. I think that there may be more material per dollar than the others.
Burkett's Videos 1-3
I waited far too long to buy these. Seriously. I might have gotten more of my match entry fees back as prize money.
Setting up equipment. Although some of the holster information is found in the Bianchi book, Blued Steel and Gunleather (a book that's older than I am), I have not seen this much information elsewhere. He even suggests a couple models of football cleats for the USPSA/IPSC games.
There is some discussion of pistols for the games, although almost every pistol shown in the videos is of the 2011 type sold by Burkett’s sponsor SVI.
Although most of videos are devoted to USPSA/IPSC type matches, much of the information carries over to IDPA, and there is IDPA specific information.
Burkett dissects draws, movement between shooting boxes, stepping into the shooting boxes, shooting from barricades, shooting on the move (also covered in Practical Shooting: Beyond Fundamentals, although slightly different technique), kneeling from standing-start and from moving, going prone, and target-to-target transitions to name a bunch. Applied to your game, these tips should cut fractions of a second off your time here and there, and improve your scores fairly dramatically.
One thing that kinda bugged me was that he made a crack about one of his students hopping into the shooting box, rather than stepping in. I swear that I’ve seen Leatham or Miculek teach exactly that on the Shooting USA TV series.
Video 3 is an interview with Brian Enos. It is about 45 minutes long, and is not broken up into chapters, which means you have to watch it all in one lump, or note the time where you left off and fast forward to it the next time.
Burkett's Video 4
The video starts out with a review of setting up gear, grip, stance, and draw, as shown in the first three videos.
Shooting from trigger reset is discussed. I wondered where that would come in.
There is more coverage of shooting multiple targets with drills on a couple plate racks.
Bonus video is of a national USPSA match. Damn! Those open class guys can really hose those targets! The stages are pretty wild too.
Burkett Practical Shooting Manual
This one’s a tough call. A lot of the same material is in the first three volumes of his video series, and it makes a little more sense in video form than in words. There are some practice drills recommended in the book that may be helpful, and some other tips and equipment information that isn’t covered in the video series. If money is really tight, and you’re good at reading textbooks, maybe skip the videos and buy the book. Otherwise, I would say skip the book and just buy the videos. If you feel like you get a lot out of the videos and want to get a little bit more of the same, then consider getting the book also.
Thinking Practical Shooting
Mostly, this book is on being mentally prepared to shoot a match, and win it. I'm having a hard time explaining what's in it without giving it all away.
Although the author says that he didn't want to make it a book about shooting technique, there is some technique discussed, and it was good enough that I highlighted a good bit of it.
I am glad I bought this book, because I can see how this information can definitely help cut down on the number of "brain freezes," mistakes, and garden variety match screw-ups. I started highlighting on my second time through the book, and by far it is my most highlighted shooting book. There is a lot of useful information here.
The book will help you to be prepared to shoot, thinking positive about your skills, and hitting
the spots you want to shoot as you go through the stage. I can see it also helping you to get jobs, women, and success in general. . . although I imagine a lot of you just rolled your eyes at that.
The book is specifically centered on IPSC, although almost all of it applies to USPSA, and a lot of it still applies to IDPA and other "practical shooting" matches.
If you are not shooting matches yet, get out there and do it, but definitely think about getting a copy of this book.
Refinement and Repetition
It’s an introduction, followed by 80 pages of dry-fire drills, with half of those pages dedicated to recording your times. I probably could have lived without this book; I could have come up with my own dry-fire drills and recorded them in a notebook or in a spreadsheet.
Principles of Performance
The first eighty-some pages are similar to Thinking Practical Shooting. Then there’s thirty-something pages of dry-fire drills (although half of the pages are for recording your times). Last are about twenty pages of live-fire exercises, again with space for recording your times.
The first eighty pages are what makes the book valuable to me. There may be some duplication from Saul’s book, but there’s a lot of other things that Saul didn’t hit on. There is an interview with Lanny Bassham, author of With Winning in Mind, that I think comes off like a sales pitch, but contains some helpful information, and I’ll probably end up picking up a copy of the book.
Perfect Practice
Like Refinement and Repetition, this is a dry-fire drill book. There’s about 120 pages of drills with maybe 1/8 of that dedicated to space for you to record your times. I could have lived without this one also. I guess that I was looking for some novel approaches to dry-fire practice, and I guess there just isn’t any.
Wednesday, June 25, 2008
1911 Build Has Started, I Guess. Intro.
My "Economic Stimulus" check is coming soon, I've got birthday checks to cash, and my bank and investment accounts are doing okay. I figure it's okay to spend some money.
The Ed Brown Maxi-Well with 25lpi checkering was on sale at Midway, and the CMC grip safeties were in stock, so I ordered them along with the Kuhnhausen shop manual, along with 1500 rounds of the MiniMags for my Glock rimfire conversion, and a Lula mag loader for the AK clone.
I guess the 1911 build has officially started.
Backstory
I’ve been on a quest to build a competition 1911 to my liking. I would prefer not to buy a complete pistol, even if it’s cheaper to go that way. I want a gunsmithing project.
I looked into using a Taurus pistol as a base, but I’d pretty much be stuck with the grip safety that comes with the pistol, and the slide to frame fit may not be as tight as I’d like. Springfield (actually Imbel made) frames are not made to John Brownings specs, and you are very limited in which grip safeties you can use.
Ideally, I would like a frame with a long dustcover. Les Baer quoted me $595.00 for a Monolith frame, which I think is the retail price for a complete Taurus PT1911. The STI RangeMaster frames are cast/cut for ramped barrels, which are generally not recommended for .45ACP pistols. SVI makes frames with long dustcovers, but will not sell the frames separately.
So, maybe I should just use a standard frame, and maybe someday down the line, a longer frame will be available at a reasonable price. I think it will happen.
So, I think I’m going to start with a Caspian frame and STI slide, and piece together the pistol that I want, with a minimum of leftover parts. Caspian casts and machines their frames here in the U.S. of A, while the Tauri, Armscor, and Springfield Armory frames and slides are all made somewhere else. “Made In America” doesn’t seem that important until it’s the job you do getting outsourced.
Edit To AddJust to be clear, this pistol will not be replacing any Glocks for carry and/or competition. Should I ever get the itch to shoot bullseye, it may get used for that. Otherwise, I may take it out to the range, or shoot action pistol matches with it if I get the itch. Mostly, it's going to be a puzzle for me, except I know where all the pieces go, they just don't fit together properly yet.
Thursday, June 19, 2008
Free Book on Gun Rights/Self Defense
The book, Stopping Power, by J. Neil Schulman, is available for download from The Gunclock Website.
Schulman summarizes the book, saying, "My 1994 book, Stopping Power: Why 70 Million Americans Own Guns, makes the point -- through analysis of history, criminology, statistics, and dramatic examples -- that 'Gun control increases violent crime by disarming helpless victims and shifting the balance of power to the illegally armed criminal or terrorist.'"
The book is over 300 pages, and well cited. Schulman makes some interesting points, observations, and analogies.
Schulman summarizes the book, saying, "My 1994 book, Stopping Power: Why 70 Million Americans Own Guns, makes the point -- through analysis of history, criminology, statistics, and dramatic examples -- that 'Gun control increases violent crime by disarming helpless victims and shifting the balance of power to the illegally armed criminal or terrorist.'"
The book is over 300 pages, and well cited. Schulman makes some interesting points, observations, and analogies.
Latest Midway Coupon, Expires the 22nd
To receive your $10 off:
1. Place $175 or more of in-stock products in your shopping cart. Enter Promotion Code WEB17568 in the box entitled 'Promotion Code' on the Shopping Cart page.
2. You will see the discount on the Confirmation page before placing your order.
3. Remember, this promotion code is valid for orders placed on MidwayUSA.com.
4. Limited to one per customer and one promotion code per retail order.
5. Hurry, offer ends at 11:59 PM CT June 22, 2008.
1. Place $175 or more of in-stock products in your shopping cart. Enter Promotion Code WEB17568 in the box entitled 'Promotion Code' on the Shopping Cart page.
2. You will see the discount on the Confirmation page before placing your order.
3. Remember, this promotion code is valid for orders placed on MidwayUSA.com.
4. Limited to one per customer and one promotion code per retail order.
5. Hurry, offer ends at 11:59 PM CT June 22, 2008.
Sunday, June 8, 2008
I Won! Sort Of. . .
I caught the bowling pin match at Field & Stream this time, having missed the first one in the fall, because I got the date wrong.
It came down to me, and Bob Britton (with a High Standard), and the same Bob Britton (second entry with a Ruger Charger). So we went up to shoot, and I edged out Bob who was shooting the High Standard. Would I have won if Bob had a second magazine for the High Standard, or if he had used the Charger? I dunno, maybe not.
I shot at least one shoot-off clean, 5 shots and 5 hits. When I reloaded, I made my mag changes clean, but I had a few moments of brain freeze, and didn't start the first shoot-off with both hands on the grip, which was just dumb.
It was fun, and was the first match I ever made a profit on, if you consider the cost of ammunition used in practice.
I shot this one with my race gun with the Advantage Arms rimfire upper, and a ProPoint PDP2 that I keep ready and sighted in for the AA upper.
I've tried to use centerfire guns before, and never did very well. I think I'll be sticking to the rimfire conversion.
It came down to me, and Bob Britton (with a High Standard), and the same Bob Britton (second entry with a Ruger Charger). So we went up to shoot, and I edged out Bob who was shooting the High Standard. Would I have won if Bob had a second magazine for the High Standard, or if he had used the Charger? I dunno, maybe not.
I shot at least one shoot-off clean, 5 shots and 5 hits. When I reloaded, I made my mag changes clean, but I had a few moments of brain freeze, and didn't start the first shoot-off with both hands on the grip, which was just dumb.
It was fun, and was the first match I ever made a profit on, if you consider the cost of ammunition used in practice.
I shot this one with my race gun with the Advantage Arms rimfire upper, and a ProPoint PDP2 that I keep ready and sighted in for the AA upper.
I've tried to use centerfire guns before, and never did very well. I think I'll be sticking to the rimfire conversion.
Tuesday, June 3, 2008
More on Mini-14 20-Round Mags from Ruger
There was a small article in American Rifleman, saying that if sales of the NRA edition Mini-14 are high enough, Ruger will start making 20-round magazines available to the public. If you are interested in standard capacity (20-rounders, not the reduced capacity) magazines for rifle(s) that your already own, now would be a good time to write a letter to Ruger.
There was another note in Guns magazine a few months later, saying that it would happen as soon as they are finished with NRA rifle production.
There was another note in Guns magazine a few months later, saying that it would happen as soon as they are finished with NRA rifle production.
Wednesday, May 21, 2008
Latest Midway Coupon, Expires the 25th
"To receive your $20 off:
1. Place $250 or more of in-stock products in your shopping cart. Enter Promotion Code WEB25058 in the box entitled 'Promotion Code' on the Shopping Cart page.
2. You will see the discount on the Confirmation page before placing your order.
3. Remember, this promotion code is valid for orders placed on MidwayUSA.com.
4. Limited to one per customer and one promotion code per retail order.
5. Hurry, offer ends at 11:59 PM CT May 25, 2008."
. . . and now for something completely different
1. Place $250 or more of in-stock products in your shopping cart. Enter Promotion Code WEB25058 in the box entitled 'Promotion Code' on the Shopping Cart page.
2. You will see the discount on the Confirmation page before placing your order.
3. Remember, this promotion code is valid for orders placed on MidwayUSA.com.
4. Limited to one per customer and one promotion code per retail order.
5. Hurry, offer ends at 11:59 PM CT May 25, 2008."
. . . and now for something completely different
Tuesday, May 13, 2008
Heinie Sights for New Kahrs Coming!
What's New at Heinie
It's down at the bottom of the page. Currently, you can get sights for Kahrs from Heinie, but only the 1st gen pistols. My PM9 currently only has the factory metal sights with two dots painted on. I'll probably pick some of the Straight Eight night sights sometime in the future.
Listed price is $110.83, which is reasonable considering the machining put into the sights, and the Trijicon Tritium inserts.
It's down at the bottom of the page. Currently, you can get sights for Kahrs from Heinie, but only the 1st gen pistols. My PM9 currently only has the factory metal sights with two dots painted on. I'll probably pick some of the Straight Eight night sights sometime in the future.
Listed price is $110.83, which is reasonable considering the machining put into the sights, and the Trijicon Tritium inserts.
Saturday, May 10, 2008
Woo Hoo! 2nd Place in Action Match with Irons
I must have had a really good brain day last Sunday. Apparently, I managed to beat all the guys with open guns to take 2nd place in the action match at the local club last week.
I did it with this:
a Glock 17 that I bought used that I have less than $550 in. I popped in a reduced-power firing pin spring for the match. The trigger bar, 5lb. connector, and firing pin are polished. The slug plug is a brass unit from Taylor Freelance. Sights are Heinie Straight Eight Slant Pros with the race cut. I had cut belt slots in the Crossbreed SuperTuck holster, and wore it OWB with some simple kydex mag pouches.
Doug beat me fair and square with the 1911. He's been playing the games longer than I have. I'm not really sure how I beat the guys with open guns who cleaned the plate rack with ease, or the other, better shooters, with full-bore Limited pistols.
I'm wondering if I'll find out later that there was a mistake in the scoring
I did it with this:
a Glock 17 that I bought used that I have less than $550 in. I popped in a reduced-power firing pin spring for the match. The trigger bar, 5lb. connector, and firing pin are polished. The slug plug is a brass unit from Taylor Freelance. Sights are Heinie Straight Eight Slant Pros with the race cut. I had cut belt slots in the Crossbreed SuperTuck holster, and wore it OWB with some simple kydex mag pouches.
Doug beat me fair and square with the 1911. He's been playing the games longer than I have. I'm not really sure how I beat the guys with open guns who cleaned the plate rack with ease, or the other, better shooters, with full-bore Limited pistols.
I'm wondering if I'll find out later that there was a mistake in the scoring
Springfield Armory XD M-Factor
Springfield Armory "The M-Factor" Home Page
First Impressions Thread on PAFOA Website
First Impressions Thread on Brian Enos Website
The new model is cosmetically redesigned, has interchangable backstraps (grip safety remains, so length of pull is not changed when swapping inserts), the magazine release button has been redesigned to make it easier to activate, there is a second slot on the dustcover rail, and a "match-grade" barrel. The .40S&W pistol can hold 16 rounds in the magazine. The 9mm version holds 19 in the mag, IIRC.
From the thread on the Enos website, it sounds like the trigger has been improved some also. Springfield claims, "The new XD(M)™ trigger has the shortest travel than any currently available polymer pistol along with a similarly short reset which keeps you on target with greater ease for faster, more accurate follow-up shots."
First Impressions Thread on PAFOA Website
First Impressions Thread on Brian Enos Website
The new model is cosmetically redesigned, has interchangable backstraps (grip safety remains, so length of pull is not changed when swapping inserts), the magazine release button has been redesigned to make it easier to activate, there is a second slot on the dustcover rail, and a "match-grade" barrel. The .40S&W pistol can hold 16 rounds in the magazine. The 9mm version holds 19 in the mag, IIRC.
From the thread on the Enos website, it sounds like the trigger has been improved some also. Springfield claims, "The new XD(M)™ trigger has the shortest travel than any currently available polymer pistol along with a similarly short reset which keeps you on target with greater ease for faster, more accurate follow-up shots."
Friday, May 9, 2008
Wal-Mart Keeping Video of Gun Purchasers?
MSNBC article on this nonsense.
I guess this is supposed to be a method of catching "straw purchasers." I suspect the result is that even more Wal-Mart stores have dropped gun sales because they don't feel like following the policy. The stores around here ('burbs of filthydelphia) don't sell guns anymore, and the closest to me has stopped selling ammo too. It's kinda funny though; the guy in the picture looks a lot like the guy that I used to see at the gun counter of the local store.
For some reason, pretty much the whole second half of the article is about NYC mayor Bloomberg's war on "illegal" guns.
I guess this is supposed to be a method of catching "straw purchasers." I suspect the result is that even more Wal-Mart stores have dropped gun sales because they don't feel like following the policy. The stores around here ('burbs of filthydelphia) don't sell guns anymore, and the closest to me has stopped selling ammo too. It's kinda funny though; the guy in the picture looks a lot like the guy that I used to see at the gun counter of the local store.
For some reason, pretty much the whole second half of the article is about NYC mayor Bloomberg's war on "illegal" guns.
Sunday, May 4, 2008
Broken Glock Locking Block Story
Posted by Lildobe on 5/1/08 PAFOA forums (Link To Thread):
So I had a friend who is a Glock Certified Armorer show me how to completely tear down my pistol last week and we discovered that the locking block was snapped clean in half!
He'd never seen nor heard this happening before and was quite surprised, but we surmised that from the buildup of carbon and dirt on the broken faces that it's been like this a long time, possibly since before I bought the weapon.
Anyway - he's since returned to his home in Georgia, and is going to drop by Smyrna and get me a new one (Along with an extended slide release
)
The point of the story is this though... Since I bought my pistol 8 months ago, I've probably put 5,000 rounds through it - and I've never once noticed anything odd about it's operation! Never a jam, never a FTF or FTE, nothing!
Here's to Glock reliability! Even when they're broken they still work flawlessly!
So I had a friend who is a Glock Certified Armorer show me how to completely tear down my pistol last week and we discovered that the locking block was snapped clean in half!
He'd never seen nor heard this happening before and was quite surprised, but we surmised that from the buildup of carbon and dirt on the broken faces that it's been like this a long time, possibly since before I bought the weapon.
Anyway - he's since returned to his home in Georgia, and is going to drop by Smyrna and get me a new one (Along with an extended slide release
)The point of the story is this though... Since I bought my pistol 8 months ago, I've probably put 5,000 rounds through it - and I've never once noticed anything odd about it's operation! Never a jam, never a FTF or FTE, nothing!
Here's to Glock reliability! Even when they're broken they still work flawlessly!
Thursday, May 1, 2008
Ooh!! Kahr Mini-380 is Coming!
I happened to be surfing the Kahr Arms site, when I noticed a link to a .380 pistol. A .380 Kahr? Yup, it looks like they are working on a pistol even smaller than the Kel-Tec .380 (P-3AT model).
I guess I'd better sock my "economic stimulus" money away into my money market account for a while so I can get one of these.
I guess I'd better sock my "economic stimulus" money away into my money market account for a while so I can get one of these.
Saturday, April 26, 2008
Midway Coupon Codes
I seem to be on a roll today. I guess I better post this before I forget.
Retailmenot.com list of Midway coupon codes, be sure to check the expiration date. If no date is listed, it probably won't work.
Midway Coupon Code thread on PAFOA forums.
Midway usually puts out the coupons toward the end of the month. If you spend $250, you get $20 off your order, or something like that.
Retailmenot.com list of Midway coupon codes, be sure to check the expiration date. If no date is listed, it probably won't work.
Midway Coupon Code thread on PAFOA forums.
Midway usually puts out the coupons toward the end of the month. If you spend $250, you get $20 off your order, or something like that.
Subscribe to:
Posts (Atom)
